top of page
All Posts


What Is Stack Bond, and Why Did TikTok Lose It Over This Wall?
Stack bond is feature brickwork where the perps line up course to course. What it is, where it's used, and why one DAT Tools TikTok sent the comments into meltdown.
DAT Tools
3 hours ago2 min read


Choosing the Right Trowel: a Brickie's Best Mate
London or Philadelphia pattern? 10 or 12 inch? A brickie's guide to picking the right bricklaying trowel for your hands, your work and long days on site.
DAT Tools
3 hours ago2 min read


They Paid Designers to Draw a Tool That Already Existed
They paid designers to draw a tool that already existed. The honest story of DAT Tools, the Australian brand making tools for brickies, by brickies.
DAT Tools
3 hours ago2 min read


Chasing a Dream to the Spec Mix Bricklayer 500
How a lifelong dream took Australian bricklayer Damian Amuso to the Spec Mix Bricklayer 500 three times, and how DAT Tools got to the world stage.
DAT Tools
3 hours ago4 min read


Clean Brick Cuts by Hand, Every Time: the DAT Brick Bolster Pro
Cut bricks by hand clean and accurate every time. The DAT Brick Bolster Pro lets you pre-measure, line up and strike, with no guesswork and no wasted bricks.
DAT Tools
3 hours ago2 min read


Brick Jointers Explained: Which One Suits the Job?
Which brick jointer should you use? A brickie's guide to roll, barrel, poly, spoon and Dutch jointers, 10 mm vs 12 mm, and how to avoid jointer burn marks.
DAT Tools
3 hours ago4 min read


Weep Hole Requirements in Australia: Getting Them Right the First Time
What the NCC says about weep holes: where they go, how big, how far apart, and how to make sure every one is clean, open and compliant before inspection.
DAT Tools
3 hours ago4 min read


WeepEase™: The Missing Step for Clean, Compliant Weep Holes
WeepEase™ forms and cleans weep holes as you lay, so every hole is open, consistent and compliant, whether it's left open or finished with a Weepa. Australian designed by bricklayers.
DAT Tools
3 hours ago4 min read
bottom of page

